top of page

How to Play & Machine Setting

HOW TO PLAY

STEP 1

Open the front door with a door key by turning the key to the right.

Take out the power cable through the hole in the back and plug in to a wall socket.

STEP 2

Put 500 or more tokens into the hopper (If Coinless Converter is already installed you don't need

tokens). 

Push the hopper all the way to the back.

STEP 4

Turn the power switch ON.

Close the front door.

Insert tokens into the Token Slot (Again, if Coinless Converter is already installed you won't need any tokens).

STEP 5

The machine is ready to play.

Press the reel spin knob and the reels will start spinning.

STEP 6

Press the stop buttons to stop the reels.

Anchor Chainging Level

​CHAINGING LEVEL

Game odds are adjustable to 6 different levels usually and the odds will vary slightly depending on the machine. Level 6 (easiest level) is the highest payout rate. If you want to change your odds, follow the steps below.

STEP1

Turn the power switch OFF.

 

STEP 2

Put the setting key into the key hole on the power supply.

 

STEP 3

Turn the setting key to the right to the ON position.

 

STEP 4

Turn the power switch ON.

 

STEP 5

Make sure the credit counter inside of the front door indicates <1>--<6>

 

STEP 6

Push the odds rate changing button on the power box or next to the credit counter inside of the door.

 

STEP 7

Set the payout level.

 

STEP 8

Pull down the spin knob.

 

STEP 9

Turn the key back to the OFF (left) position.

Anchor Volume Install

VOLUME INSTALL

volume1.HEIC
volume7のコピー.HEIC
Anchore Error Clearing
Anchore FAQ

ERROR CLEARING

When playing Pachislo you may be required to reset the machine. For minor resets such as coin

acceptor, hopper malfunctions after the completion of a bonus game, insert the door key into

the door key hole and turn to the LEFT. It will reset the game or clear the error code. For major resets such as RAM crash, power surge or outage, or big bonus game interruption, push the reset button inside of the machine or follow the Changing Payout Rates or Full Reset Procedure process.

Refilling the Hopper

STEP 1

Open the front cover.

STEP 2

Put tokens in the hopper.

STEP 3

Push the reset button to be ready for the tokens to come out.

 

STEP 4

Close the front cover.

FAQ

It doesn't  power up.

Make sure that your machine is plugged into a outlet and the power switch is in the ON position. You may have to check fuses as well.

It doesn't accept tokens and GAME OVER is indicated.

Jackpot condition may have occurred. Reset the machine.

It doesn't switch from CREDIT play to REGULAR play mode.

On most machines, there is a credit or cancel button on the left front of the machine. Press the button for up to 10 seconds. There might be a delay on the circuit.

The Reel don't spin.

Make sure that wire harness to reel bundle is plugged in and secure. Make sure reels spin freely. Nothing should obstruct the reels from spinning freely. Reset the machine by depressing reset switch if necessary.

Reels don't stop after pressing stop buttons.

Fuse may have to be replaced. If this is not the problem, check the ribbon cable connections. You may need to disconnect each cable starting at the reels and reconnect them.

bottom of page